ZX305 Fully Automatic Twisted Wire Crimping Machine

Functions

Fixed-length wire cutting, double-end full stripping (automatic stripping length setting), double-end half stripping, stripping tool retraction, automatic stripping depth adjustment, double-end waterproof crimping, automatic crimp position setting, inching operation.Supports computer network connection.

Production Capacity

Max wire feeding speed: 12 m/sMax,acceleration: 60 m/s²Max double-end crimping output: 5,000 pcs/h (at cutting length 60 mm)

Applicable Wire Range

AWG#24～#10   0.2~6.0m㎡。(For reference only; values vary slightly with different wire types)

Wire Cutting Length

60~90000mm

Cutting Length Tolerance

±1 mm for lengths ≤ 500 mm; ±0.2% for lengths over 500 mm

(Slight deviation exists for different wire materials)

Stripping Length

Single side: 2~16,mmDouble side: 2~20 mm

Crimp Force

Standard: 20 kN (equivalent to 2.0 Ton); upgradable to 40 kN (equivalent to 4.0 Ton)

Power Supply

3-phase AC 380 V, 5.2 kW, 50 Hz, 16 A

Compressed Air Requirement

0.55 MPa (5.5 kgf/cm²), 100 NL/min(Dry and clean compressed air is required)

Machine Dimensions & Weight

Equipment L×W×H: 3600L × 1510W × 1800H; Equipment L×W×H with safety guard raised: 3600L × 1510W × 2600H.

Net weight: approx. 1200kg,  ※ Standard for 2m thin-wire machine

Detection Device

Low air pressure, wire presence/absence, wire overload, crimping management analysis, terminal presence/absence, terminal overload, wire deviation detection, seal plug detection, safety guard open‑close detection